Skip to main content

Posts

Showing posts from November, 2016

DB7 - Removal of stock bushings, Installing poly bushings

Things to note:
This is part 3 of this particular write up. Please see, part 1 and 2 for further details and to get caught up to this point.

Please note before you start this project, to remove the upper and lower ball joints you will need a very large C-Clamp that can be rented from the auto parts or a press. There is also a specific socket adapter kit you must also rent in order to use that C-Clamp method. Honda's have interesting front control arms that won't allow you to push that ball joint out with out. In my case, I have a 4 point 66mm impact socket that worked just fine. If not, I would have needed to rent the secondary kit that comes with the extra adapters.

This kit from Advanced Auto looks like it comes with everything: Powerbuilt Tools Ball Joint...

The scope of this project was to replace:
Lower control arm bushings.
Lower shock mount bushings.
Tie rod ends.
Lower ball joints.
Upper ball joints.
Sway bar end links.
Upper, inner, A-arm bushings.

What are we doing th…